Designed for the ordinary person in the extraordinary moment, Philips HeartStart HS1 AED is ready to act and virtually ready to go. It allows anyone with little or no training to treat the most common cause of suspected sudden cardiac arrest (SCA) by delivering a shock quickly and effectively, wherever SCA happens. The HS1 AED provides practically real-time guidance through step-by-step voice commands from pad placement to performing CPR. When every minute counts, Philips HeartStart HS1 AED is the partner by your side. Side by side. Step by step.
Ready to act. Ready to go.
Start quickly. Treat confidently.
Easy as 1-2-3
Specifications
-
Battery Type 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cellsCapacity Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003)Install-by Date Battery is labeled with an install-by date of at least five years from date of manufactureStandby Life Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses) -
Product Specifications Kit Contents Defibrillator, battery (one, pre-installed), SMART Pads (one set, pre-installed), set-up/maintenance guide with expiration date tags, owner's manual, quick reference guideWaveform SMART Truncated exponential biphasic. Waveform parameters adjusted as a function of patient impedanceDefibrillation peak current - Adult 32 A (150 J nominal) into a 50 ohm loadDefibrillation peak current - Pediatric 19 A (50 J nominal) into a 50 ohm load (using optional infant/child SMART Pads Cartridge)Shock-to-Shock Cycle Time Typically less than 20 seconds between shocks in a seriesQuick Shock Able to deliver a shock after the end of a CPR interval, typically in eight secondsVoice Instructions Detailed voice messages guide responder through use of the defibrillatorCPR Guidance Instructions for adult and infant/child CPR available at user selectionShock Delivery Via adhesive pads placed on patient's bare skin as illustrated on padsControls Green SMART Pads cartridge handle, green On/Off button, blue i-button, orange Shock buttonIndicators Ready light, blue i-button, caution light -
Environmental/Physical Requirements Standby Temperature 0 - 43 °C (32 - 109 °F)Operating Humidity 0 to 95 % relative humidity (non-condensing)Standby Humidity 0 to 75 % relative humidity (non-condensing)Standby Altitude > 48 hours from 0 to 8,500 ft and <48 hours from 8,500 to 15,000 ftEMI (Radiated/Immunity) Meets EN55011 Group 1 Level B Class B and EN61000-4-3 -
SMART Pads Energy delivered Adult: nominal 150 joules into a 50 ohm load; Infant/Child: nominal 50 joules into a 50 ohm loadHow Supplied Disposable cartridge, containing adhesive defibrillation pads, clicks into defibrillator for an integrated pads solutionActive Surface Area 85 cm² (13.2 in²) eachCable Length Adult pads: 137 cm (54"); Infant/Child pads: 102 cm (40")Use-by Date Cartridge is labeled with a use-by date of at least two years from date of manufactureTraining pads (optional) Special pads put HeartStart into training mode and disable its energy delivery capability. Training pads feature 8 real-world training scripts. Use with training mat (included) or with adapters on manikins -
Environmental/Physical Requirements Sealing Solid objects per EN60529 class IP2X; Drip-proof per EN60529 class IPX1Operating Temperature 0 - 50 °C (32 - 122 °F)Operating Altitude 0 to 4,500 m (0 to 15,000 ft)Shock/Drop Abuse Tolerance Withstands 1 meter drop to any edge, corner, or surfaceVibration Meets EN1789 random and swept sine, road ambulance specification in operating and standby states -
Automated and User-activated Self-tests Daily Automatic Self-tests Tests internal circuitry, waveform delivery system, pads cartridge, and battery capacityPads Integrity Test Specifically tests readiness-for-use of pads (gel moisture)Battery Insertion Test Upon battery insertion, extensive automatic self-tests and user-interactive tests check device readinessStatus Indicator Blinking green "Ready" light indicates ready for use. Audible "chirp" indicates need for maintenance -
Data Recording and Transmission Infrared Wireless transmission of event data to a PC or Palm PDA, using the IrDA protocolData Stored First 15 minutes of ECG and the entire incident's events and analysis decisions